Performance Engines Inventory

Make/Model Parts Short block Heads Info Price
FORD 347 STROKER
forged pistons, molly rings, premium engine bearings, hv oil pump, double roler timing kit hydraulic roller camshaft/lifter kit new forged crank, conn rods roller rockers, hardened pugs rods new oil pan, front timing cover harmonig balancer, edelbrok alum air gap intake manifold
block thermally heat cleaned bored and micro honed oversized balanced assembly
edelbrock alum cylinder head with stainless steel valves
dyno tested and tuned package fuel recommendation 94 octane 450 HP 400FT/lbs torque compression 9.8 to 1
11500
383 CHEV STOKER 425hp
forged flat top pistons, moly rings, forged “H” beam rods, new 3.750 cast steel crankshaft, double roller timing kit, high volume oil pump, hydraulic roller camshaft/lifters, hardened push rods, alum roller rockers, hs gaskets
bored and micro honed over size, align honed mains, decks resurfaced, balanced and blue printed assembly
Alum cylinder heads, multi-angle valve job, 2.02/.160 stainless steel valves, performance valve springs/retainers, hardened locks
dyno test results 425hp @5700 450ft/lbs torque at 4500 rpm, this engine for is street use using octane rating of 94, recommended carb holley 770 street avenger
$10500
GM LS SERIES GM 5.3 LM7 450hp/420 tq
hyperutetic pistons, gm OE rods, performance hydraulic roller cam, timing set, oil pump
cast iron block, bored, micro honed oversize, block resurfaced, rods resized, crank machined 24x crank
64 cc cylinder heads, multi angle valve job
$5450 core 1000
SUBARU SOHC/DOHC
CHRYSLER 318/360
350 Chev. 295 HP Engine.. 85-older carb type
Hypereutectic flat top 9 to 1 pistons Speed Pro Rings, performance camshaft/lifters double roller timing kit ACL alum bearings HD head gaskets
Block Thermal Heat Cleaned CNC Bored, Align Honed Rods Re-Sized, block resurfaced
1.940 Intake, 1.600 Exhaust Valves Multi-Angle Valve Job New Springs & Locks Resurfaced, Pressure Tested
options alum performance intake, carburator, new oil pan, harmonic balancer
4850
FORD 351W STROKER 390CID
FORGED PISTONS, MOLY RINGS, HYD ROLLER CAM, DOUBLE ROLLER TIMING, HD ENGINE BEARINGS, ALUM ROLLER ROCKERS, HARDERNED PUSH RODS, EAGLE/SCAT CRANK AND RODS,
BLOCK CNC BORED OVER SIZE, ALIGN-HONED, DECKED, BALANCED AND BLUE PRINTED ASSEMBLY
EDEBROCK ALUM CYL HEADS, STAINLESS STEEL VALVES, EDEBROCK VICTOR JR INTAKE
DYNO TESTED AND TUNED 464HP 452FT/LBS TQ
14500